Home :: Products :: Fiber Optic Transmission

Fiber Optic Receiver Multichannel RF AM

TRANSPORT 2200-750(38)-X17 optical receiver (Rx) provides high bandwidth, multi-service transmission over single mode fiber.

TR2200 receivers integrate a high sensitivity, low reflection PIN photodiode with high linearity RF amplification and 20 dB test points. A passive interface from the photodiode to the internal amplification allows operation over the entire specified optical budget without external optical attenuators or an impact upon unit performance.

Model Options

The 2200-750(XX)-X17 is available in a rack (2200-750(XX)-R17) style and a wall mount (2200-750(XX)-N17) style. The TR2200 receiver is available in 10 or 38dBmV output. See operation levels for details.

TR2200 receivers offer packaging, output level and bandwidth options to complete each transmission link with the best choice for the application. The following TR2200 models are packaged in either "R" designated 1.75" high 19" rack mount or "N" designated 9"x5"x3" desk/wall mount units:

TR2200-750(10)-x 750 MHz, 10 dBmV output
TR2200-750(38)-x 750 MHz, 38 dBmV output

All TR2200 receiver models include UL approved wall pack, 26 VAC transformer.

General

RF Connector: 75 Ohms "F" type
Test Point, dB: -20, "F" type connector
RF Return Loss, dB: 16
Bandwidth, MHz: 40 to 550 or 40 to 750, 1.5dB
Wavelength, nm: 1200 to 1600
Optical Connectors: FC, FC-APC, SC, SC-APC
Operating Temp. degrees C: 0 to 60
Power Consumption: 16 Watts
Power Source:
    UL approved wall pack
    117 VAC input/26VAC 60 Hz, 47-400 Hz 1.15 A output
    220 VAC input/26VAC 50 Hz, 47-400 Hz 1.54 A output
Dimension: 1.75" x 9.0" x 19.0", 3.0" x 9.0" x 5.0"

* BNI recommends connectors with >40dB optical return loss.

Operation Levels*

TR2200	Channel Capacity AM-VSB	RF Input Level dBmV	Transmit Power (typ) (mW) dBm
-7715	80 110	24 22.5	16 (12) 16 (12)
-7713	80 110	24 22.5	10 (10) 10 (10)
-7709	80 110	24 22.5	6 (8) 6 (8)
-7705	80 110	24 22.5	4 (6) 4 (6)

Note: Single mode fiber is required for operation of TR2000 Series equipment. Specifications are subject to change for product improvements. 2/03