Fiber Optic Receiver TR1101-X-R-VDA2 Spec. Sheet -->
Fiber Optic Receiver Single Channel Baseband TR1101-X-R-VDA2

Description
TRANSPORT 1101-X-X-VDA2 fiber optic receiver (Rx) provides capacity to receive one full motion video, multiple audio and a high speed data carrier on one fiber strand.

The TR1101-X-X-VDA2 fiber optic receiver supports broadcast quality full motion video performance over a 13 dB optical path loss (operating at 1310 nm). Each TR1101 receiver features an internal FM demodulator which converts the transport IF carrier back to direct baseband video and audio outputs.

An Auxiliary RF port also delivers a "T" channel carrier to the appropriate external RF modem for connection of fax signals, control data or high speed 10 Mbps data.

Mounting Options
The TR1101-X-X-VDA2 is available in a rack (H-R-VDA2) style and a wall (N-R-VDA2) style. See operation parameters for dimensions.

The TR1101-UR universal rack is a 5u high 19² housing that accommodates a power supply module and up to (10) TR1101 ³H² style fiber optic transmitters and receivers.

TR1101-N-R-VDA type fiber optic receivers are rugged stand-alone units typically located at the customer premise. The 3² x 5² x 10² package can be shelf, wall or desk mounted and includes a power transformer eliminating the need for equipment racks at all locations.

General
Video Connector: 75 Ohms BNC
Audio Connector: 600 W balanced terminal block
RF Auxiliary Connector: 75 W "F" type
RF Return Loss, dB: 16
Video Bandwidth: 20 Hz to 4.5 MHz
Audio Bandwidth: 20 Hz to 15 kHz
RF Auxiliary Bandwidth: 15 to 30 MHz, T9 or T10
Video Output Level: 1.0 Vpp typ
Audio Output Level: 1.0 Vrms typ
RF Aux. Output Level: 24 dBmV Nominal
Wavelength, nm: 1200-1600
Optical Connectors: FC, FC-APC, SC, SC-APC or ST

Performance
Optical path Loss: 13 dB
Video SNR, dB: 60 min, 62 typ (NTSC weighting)
Bar Amplitude: 95 to 105 IRE
Sync Amp. (%BAR): 35 to 42
Burst Amp. (%Sync): 95 to 105
Burst Amp. (%BAR): 36 to 44
Line Time Distortion, %: 0 to 2
Chrom.Luminous Gain: 93 to 107
Differential Phase: 2.5 degrees max
Differntial Gain: 5% typ, 8% max
Luminous Non-Linearity: 4% typ, 8% max

Audio SNR, dB: 45 min, 52 typ (unweighted)
T.H.D @ 1.2 kHz: 0.5% max

Operation Parameters
Dimension:
"N" Style brick 2.90" x 4.60" x 10.00"
"H" Style module 1.00" x 5.00" x 9.00"
"H" TR1101-UR rack 5.25" x 12.00" x 19.00"

Operating Temp. degrees C: -10 to 50
Power Consumption: 15 Watts per unit
Power Source:
"N" Style brick 85 to 132 VAC, 47-400 Hz
"H" TR1101-UR rack
       85 to 132 VAC, 47-400 Hz
      170 to 265 VAC, 47-400 Hz
       36 to 76 VDC

Universal Rack & Power Supply Module
TR1101-UR        10 slot rack
TR1000-PS-17   117 VAC power supply
TR1000-PS-22   220 VAC power supply
TR1000-PS-48   -48 VDC power supply

Note: Single mode fiber is required for operation of TR1101 Series equipment. Specifications are subject to change for product improvements. 5/00

TR1000
FM Single Channel Series
Fiber Optic Transmitter: Baseband FM
Fiber Optic Receiver: Baseband FM
Fiber Optic Transmitter: RF
Fiber Optic Receiver: RF

TR2000
AM Multichannel Series
Fiber Optic Transmitter: RF AM
Fiber Optic Receiver: RF AM
870 Mhz Fiber Nodes

Fiber Optic Splitters
Fiber Optic Splitters: Passive

All contents copyright © 2000-2003 BNI Solutions LLC
Questions or Comments can be directed to the BNI Webmaster