..
 

Home : Products : Fiber Optic Transmission : Optical Receiver : Multichannel RF AM

 
 


Optical Receiver TR2200-750(38)-R17 Spec. Sheet -->



Optical Receiver
Multichannel RF AM
TR2200-750(38)-X17

Description
TRANSPORT 2200-750(38)-X17 optical receiver (Rx) provides high bandwidth, multi-service transmission over single mode fiber.

TR2200 receivers integrate a high sensitivity, low reflection PIN photodiode with high linearity RF amplification and 20 dB test points. A passive interface from the photodiode to the internal amplification allows operation over the entire specified optical budget without external optical attenuators or an impact upon unit performance.

Model Options
The 2200-750(XX)-X17 is available in a rack (2200-750(XX)-R17) style and a wall mount (2200-750(XX)-N17) style. The TR2200 receiver is available in 10 or 38dBmV output. See operation levels for details.

TR2200 receivers offer packaging, output level and bandwidth options to complete each transmission link with the best choice for the application. The following TR2200 models are packaged in either "R" designated 1.75" high 19" rack mount or "N" designated 9"x5"x3" desk/wall mount units:

  • TR2200-750(10)-x 750 MHz, 10 dBmV output
  • TR2200-750(38)-x 750 MHz, 38 dBmV output

All TR2200 receiver models include UL approved wall pack, 26 VAC transformer.

General
RF Connector: 75 Ohms "F" type
Test Point, dB: -20, "F" type connector
RF Return Loss, dB: 16
Bandwidth, MHz: 40 to 550 or 40 to 750, 1.5dB
Wavelength, nm: 1200 to 1600
Optical Connectors: FC, FC-APC, SC, SC-APC

Operating Temp. degrees C: 0 to 60
Power Consumption: 16 Watts
Power Source:
    UL approved wall pack
    117 VAC input/26VAC 60 Hz, 47-400 Hz 1.15 A output
    220 VAC input/26VAC 50 Hz, 47-400 Hz 1.54 A output

Dimension: 1.75" x 9.0" x 19.0", 3.0" x 9.0" x 5.0"

* BNI recommends connectors with >40dB optical return loss.

Operation Levels*

TR2200

Channel
Capacity
AM-VSB**

Nominal
Optical Output

RF Output
Levels
dBmV**

-750(10)
-750(38)

110
110

0
0

10.0
38.0

Note: Single mode fiber is required for operation of TR2000 Series equipment. Specifications are subject to change for product improvements. 2/03

 

 

 

TR1000
FM Single Channel Series

Optical Transmitter: Baseband FM
Optical Receiver: Baseband FM
Optical Transmitter: RF
Optical Receiver: RF

TR2000
AM Multichannel Series

Optical Transmitter: RF AM
Optical Receiver: RF AM
870 Mhz Fiber Nodes

Fiber Optic Splitters
Optical Splitters: Passive

 

Have a Question?
Ask BNI Here!

 

 

|Home| |Login| |Support| |About BNI| |Products| |Network Services| |Resellers| |Success Stories|

All contents copyright © 2000-2003 BNI Solutions LLC
Questions or Comments can be directed to the BNI Webmaster